How to Add More Water to LG Top Load Washer Products
Have you been asking yourself how to add more water to LG top load washer dryers? It is really simple to do and it can save you loads of time and money. If you want to know how to add more water to a LG top load washer, the first thing that you need to do is remove the top loading washer from your machine and make sure that there is no solid material hanging down. If you do not remove the top loading washer from your machine, the next step is to take it apart.
Once you have taken apart your machine, the next thing that you need to do is understand the different parts of the washer. The first thing that we are going to look at is the bottom feeder tubes which will have either a round or square finish depending on which model you have. These tubes will have a feed mechanism on the bottom, which is responsible for the suction that your machine will get. There are two types of feed tube, the round feed tube and the square feed tube, once you have taken these out, you can start working on how to add more water to your LG top load washer by looking at the inner sleeve which is usually located right underneath the feeder.
Once you have taken off the inner sleeve, you will be able to see a feed nozzle which is responsible for the suction that your machine will get. If your machine does not have a feed nozzle, then you can insert a towel in order to help it out. When you are working on how to add more water to your LG top load washer, you should work on lubricating the feed tube as well as the nozzle in order to prevent clogging. If your machine stops functioning, the best thing that you can do is to open up the machine and give it a good cleaning.
If you want to know how to add more water to your LG top load washer, the first thing that you will want to do is make sure that you drain the machine completely. If you leave your machine plugged in, it will only cause your machine to become clogged up with grease and dirt. When you drain the machine, you will need to make sure that you open all the drain holes in order to ensure that there is no build up left. After you have drained the machine, you will then need to check out the bottom drain valve for any build up. This is usually an indicator that there is something clogging at the bottom drain.
The next thing that you will want to do is open up the machine and make sure that you remove the floor plates and the bottom drain plug. If you have found that your machine is not draining any fluids, you may simply have to check the pressure tank and see if it is leaking. If you find that the tank is not leaking, you should try to lower the machine. Some people may have added a few drops of oil to the bottom drain plug to make sure that the machine is draining. If this does not resolve the problem, you may need to go through your machine and clean out all of the different pipes on the machine. If you do not clean out the pipes and they become clogged, you will have no choice but to replace your top load washer in most cases.
If you have just added more water to your LG top load washer and you notice that it is still draining, there are a few things that you can try to help the machine run more efficiently. The first thing that you can try to resolve the problem is to run some cleaner water through the machine and to flush out all of the parts. Another possible fix that you can try is to place some bubble wrap over the drain trap and let it set for a few hours. If you find that none of these methods help your machine, you may need to take it in to your local LG store and have them check it out for you.