When you have made the decision that you need to learn how to move a thermostat, it is a good idea to find out what kind of service or parts will be required. When you are a bit short on cash or simply don’t want to pay an arm and a leg for such services, you can learn how to move a thermostat yourself. This can save you the money that a professional would charge and you won’t have to deal with the trouble of waiting for a technician to come fix your problem. If you don’t feel comfortable moving the unit by yourself, you can call your heating and cooling company for help. However, if you have no idea what to do, you should know what you are doing so that you can get your money’s worth.
When you are learning how to move a thermostat, it is important that you keep one thing in mind. Many people make the mistake of not checking their thermostat when they initially set it. Before you start your job of changing the temperature settings on your home, you should check the thermostat to make sure that it is properly working. If you fail to make sure this happens, you could end up setting the wrong temperature which could be extremely dangerous.
When you are checking the thermostat, make sure that you look at all the wires and the terminals. This is very important as you will have to make sure that they work before you proceed any further. Check the insulation too; it should be fairly new and clean. With the right insulation, you can make sure that your moving process goes smoothly.
You might be wondering how to move a thermostat on your own but you shouldn’t worry too much about this task. Even if you have never done it before, you should be able to get it done without any problems. When you begin your project of moving a thermostat, the first thing that you need to do is take down the original thermostat. You can do this with a screwdriver or with a drill. The reason why you would need to remove it is because you will then be able to install the new one. When you place the new thermostat, you will find that it works in the same way as the old one did; so make sure that the wires are connected correctly before you begin.
Once you have installed the thermostat, you will then want to connect the wires. To do this, you need to use the wire stripper. However, if you are unsure of how to do this, you can find many help articles and videos online to help you out. Once you are finished with connecting the wires, you should put them back together so that they are secure. If you have found a good guide or video, you should be able to get this step done in only a few minutes.
After you have completed this step, you will then want to look at your previous thermostat. On the back of the thermostat, there are two wires that are labeled black and white. You will need to identify which wire goes to the warm and cool settings on your home. You will then want to undo the wiring so that you will be able to reconnect the thermostat back to the house. If you have a digital thermostat, all you have to do is to flip the switch in order to turn the heat and air on and off in your house. After you have done this, you will find that you can easily move a thermostat whenever you feel that it is not working properly in your home.